01-28-2024, 04:56 PM
(01-28-2024, 02:19 PM)Gwumpy Wrote: Upon opening Align Cyclic window again the Last button did reposition everything although I was still confused at first.
The numbers didn't seem right until I realized I needed to change the Align option to where I had left off, pressing the Last button again.
Why were the numbers changed upon reopening?
What still didn't make since was the Add holons had reset to zero. Which makes since because I had already added the holons so It wouldn't show there.
I remembered I could see the total number of holons in the 'sel' and 'of' box but that still only gave me total number of holons instead of the number I had just previously added.
Is there a way to see which holons I had previously added?
I looked up, and found, the Holon Info List but since all the holons I previously added in the Align Cyclic window were the same it left me thinking I would have to remember or keep my own log when using the Add holons function in the future.
When you open Align Cyclic, the default action is to assume you haven't already opened it, so it calculates values to suit the default, which is different from whatever you did last. So you have to press Last if that's what you want.
Align Cyclic uses the currently selected holons, or you can start with just the active holon and use the Add control. After you have used Add, all those holons are still selected. If you open Align Cyclic again, it will use the same holons (click Last to use the same settings.) Add shows 0 because those holons already exist now. The holons you previously added are the selected holons. (You can use Selection memory spots to store and recall selections if you want to make other changes in the meantime.)